Introducing the New XL Lift

46 Comments

Koala Studios is excited to introduce the new XL Lift, designed to provide the support and power required to lift today’s largest and heaviest machines.

Koala Studios: Introducing the New XL Lift
 

Powered by dual motors, the XL Lift features a rack and pinion direct drive system.

-The XL Lift is rKoala Studios: XL Liftecommended as an additional accessory for machines measuring between 22 and 27 inches wide and/or weighing more than 50 pounds.

-The XL Lift is an available accessory option for the SewMate Plus IV, TreasureChest Plus IV, QuiltMatePlus IV, DualMate Plus IV (right lift only), and the BERNINA Studio.

-The XL Lift cannot be added to an existing Koala Studio. The Baby Lock Destiny and Brother Dream Machine do not fit cabinets with a G3 Lift as designed or recommended, but if you wish to use your existing Koala cabinet, there are a few things to keep in mind:

  • The standard G3 Lift will support the weight of the machine in the top position with the machine platform level with the Studio’s top surface.
  • The G3 Lift can raise and lower these machines from the stored position, but the power cords should be disconnected and removed while operating the lift. It’s a tight fit, so please ensure that the machine has clearance around it.
  • Using these machine in the flatbed position with a traditional Machine Insert is not possible. However, the machine can be raised slightly and used with a modified Custom Insert that would rest on the Studio surface.  Your Koala Retailer can order this “modified” insert for you.

-If you are thinking about purchasing a new Koala Studio and don’t have one of these larger machines, but plan to purchase one in the future, it is highly recommended to add the XL Lift. Once the Studio is made with the standard G3 Lift it cannot be retrofitted for the XL Lift.

-Koala retailers will begin taking orders on Studios with XL Lifts on October 1st, and the Studios will begin shipping in November.  The XL lift option will be added to the Sewing and Craft Club soon.

Koala Studios: Introducing the New XL Lift

As sewing machine technology gets bigger and better, Koala continues to lead in innovative sewing furniture design. If you have additional questions, please feel free to leave them in the comments or contact your local Koala Studios retailer.

 

 

VN:F [1.9.22_1171]
Click the stars to rate the studio from 1 to 10.
like... love... my dream
Rating: 7.7/10 (37 votes cast)
Introducing the New XL Lift, 7.7 out of 10 based on 37 ratings

46 Comments (+add yours?)

  1. avatar Brent
    Oct 27, 2014 @ 10:12:07

    Hello,
    I’m very interested in the G3 or XL lift, as I would like to install it in a custom cabinet. Can you provide more information on either one, i.e. manufacturer, part number, specs, etc.
    Thank you!
    Brent

    Reply

    • avatar Susanne
      Nov 03, 2014 @ 08:35:51

      Hi Brent – Koala lifts are only available as part of a Koala Studio.

      Reply

  2. avatar Allison Nesbitt
    Oct 31, 2014 @ 17:03:24

    I have a Janome 15000. Will this machine fit in a Koala cabinet. I am interested in full storage underneath the cabinet, flat-bed usage and on top of table. Looking forward to hearing from you. Thank You.

    Reply

  3. avatar Sandy Wootten
    Dec 04, 2014 @ 16:42:35

    I have the dualmate cabinet and have purchased the new Dream Machine by brother. Can I see a picture of the insert that you are suggesting. Secondly do you sell self healing mats that fit the table part of this cabinet.

    Thanks Sandy

    Reply

    • avatar MaryStanley
      Feb 20, 2015 @ 19:51:13

      I also would like to see a picture of the insert to use with the Dream Machine on my Quiltmate cabinet.

      Also would like to say that these cabinets are worth their money, simply because the support for any problems is wonderful. Have had a couple of problems and they have all been corrected in a short time and with no charge. I have been so pleased.

      Thanks!

      Mary Stanley

      Reply

    • avatar Jan Schiltz
      Jan 26, 2016 @ 08:35:50

      I bought what I thought was a single mat the right size for my table over the internet. It turned out to be 2 mats with a locking system with metal clips. The mat had to be the right length and width and it was. My granddaughter and I use a strong tape to tape them together. Have been using them for over a year that way. Works great. Just have to watch for where they were put together. Hope that helps.

      Reply

  4. avatar Shirley
    Feb 20, 2015 @ 08:19:28

    I do not see a dealer in Florida??

    Reply

  5. avatar Ann Arthur
    Feb 20, 2015 @ 09:27:33

    I have a Koala sewing center and would like to know if you make an insert to fit between the machine and the opening so you can leave the sewing machine level with the top of the table. It would be custom made to the model of the sewing machine. An example would be the insert that is used with the SEWEZI Portable Sewing Table.

    Reply

  6. avatar kathy
    Feb 20, 2015 @ 09:31:20

    To Brent: Linear actuators. They are used to lift TV’s from cabinets, and in auto industry to lift heavy objects for repair, among other things. If you have the talent & math skills to build a custom cabinet, you are well on your way.

    Reply

  7. avatar Diana
    Feb 20, 2015 @ 09:35:52

    OMG…. I love it, I wish I can have it some day and put to my sewing room and my machine will love stay on top of that table set hmmmm

    Reply

  8. avatar Shirley Brown
    Feb 20, 2015 @ 11:44:52

    One more reason to charge more money. If the cabinet is made for larger machines then it should come as part of the package. This stuff is already over priced.

    Reply

  9. avatar Patricia Christensen
    Feb 20, 2015 @ 12:52:35

    After years of wishing and saving, I now have the Sew Mate Plus IV studio with the XL lift. It’s a dream unit and the XL Lift works smoothly and is so quiet. It’s wonderful to have the strong lift and support for my heavy machine. The lift places my machine at any level I want for sewing or embroidery. The matching insert creates a perfect flat surface. The cabinet is certainly worth every penny and the time I spent planning for it.

    Reply

  10. avatar Cassandra J Allen
    Feb 21, 2015 @ 18:49:59

    I LOVE my Koala sewing studio. The picture shown is exactly what I have, color and all. It is wonderful. The cutting height is perfect. The color fits my décor. It keeps me organized and everything is within my reach. I can say nothing against Koala Sewing Studios. It’s wonderful.
    Thanks Koala!!!

    Reply

  11. avatar Dara Dubois
    Feb 22, 2015 @ 22:29:17

    I love my Koala sewing studio. I have the Quilt Pro Plus and the Cub and looking to add the corner unit next.I have 2 machines on each piece and love them. Can’t imagine my sewing room without them. Thank you!

    Reply

  12. avatar Kenda Ross
    May 15, 2015 @ 07:36:44

    I would love to have a Koala sewing studio!! My husband was a great man of making things, but he passed on May 10th. This would look good in my craft room!!

    Reply

  13. avatar EARLIA DERRINGER
    May 15, 2015 @ 07:39:18

    Which cabinet is the one advertised for the Bernina 830?

    Reply

  14. avatar Joycehgillespie
    May 15, 2015 @ 07:55:32

    Love it would be nice with a baby lock in it

    Reply

  15. avatar Jennifer Goodall
    May 15, 2015 @ 08:17:06

    What a dream come true to win such a georgeous and functional piece of furniture. I would have to get a new machine for it!! :)

    Reply

  16. avatar Nancy Bowers
    May 15, 2015 @ 08:54:10

    I believe this set-up is called “A Dream Come True” for anyone who loves to sew. Thanks for the opportunity to win one.

    Reply

  17. avatar Diane Mettler
    May 15, 2015 @ 09:00:08

    I have a Koala Cabinet for a smaller machine. It is marvelous and I would buy the new one for my Embroidery Machine but as a retiree it is not in my financial future……but we can all dream.

    Koala products are built to last and will probably out last my lifetime…..

    Reply

  18. avatar Betsy Taylor
    May 15, 2015 @ 09:04:07

    Please, I need this Koala Studio for my sewing room, that really isn’t a sewing room. However, with this dream come true, it would become my True sewing room. I have a room ready to receive this. Thank you!!

    Reply

  19. avatar Cynthia
    May 15, 2015 @ 12:03:56

    What a dream come true. Someone will be a lucky person. ME?????

    Reply

  20. avatar Betty Fisher
    May 15, 2015 @ 16:21:17

    My area is tight and this would help organize me

    Reply

  21. avatar Tony Tannahill
    May 15, 2015 @ 19:03:29

    <3 :) Would Love to win <3 :)

    Reply

  22. avatar Susanne Deg
    May 16, 2015 @ 02:24:19

    Life is Good..but one should never stop dreaming. It would be “A Dream Come True” with a Koala Studio! What a wonderful way to celebrate quilting, embroidery, and sewing! The beauty and quality of Koala furniture is beyond compare! and worth its weight in GOLD! and it would be sew well loved and appreciated in my home!

    Reply

  23. avatar sandy schultheiss
    May 16, 2015 @ 05:47:56

    Would love to win a Koala. I have a Bernina 820.

    Reply

  24. avatar Pat C
    May 16, 2015 @ 21:27:08

    Presently, I have a sewing table that is about 40 years old. Time to update and have a new sewing table and matching storage. I am retired and cannot afford to purchase these items.

    Reply

  25. avatar Diane S.
    May 18, 2015 @ 15:00:15

    This is a real beauty. I would love to own one.

    Reply

  26. avatar Rosemarie A. Greenwald
    May 22, 2015 @ 10:37:08

    I currently own a Koala studio but it was then fitted for the Bernina 1530. I now have a Bernina 830 which was top-of-line prior to the 880. I assume this XL-lift will accommodate my machine. I understand it cannot be retro-fitted to my current Koala cabinet. My question is will I be able to get the same match of wood to go with my other cabinet? Thnx.

    Reply

  27. avatar Rosemarie A. Greenwald
    May 22, 2015 @ 10:51:23

    See comment above. Needed to correct my email address.

    Reply

  28. avatar William Allender
    Oct 09, 2015 @ 11:38:40

    My wife purchased the KOALA cabinet set about 5 years ago and the lift that is in it has broken. I have to get under the cabinet to do the adjustments for her when she wants to change machines. I was wondering if the XL LIFT can be purchased as I can do the installation my self.

    Reply

  29. avatar Carol
    Nov 17, 2015 @ 09:52:49

    I have a Brother Quattro 2 6700d ad was wondering if the standard lift will work with this machine?

    Reply

  30. avatar Lanie Williams
    Nov 17, 2015 @ 11:40:03

    I wish you would put prices on these posts. On seeing something good, my first question is “can I afford it?”

    Reply

  31. avatar Jan
    Nov 18, 2015 @ 20:22:17

    I just got an Viking Epic. I can lift the machine which means it weighs less than my designer Machine. Will the lift I have work alright for the Epic?

    Reply

  32. avatar Janet
    Nov 20, 2015 @ 03:49:24

    The Viking Designer Epic machine (without embroidery attachment) DOES fit in my Treasure Chest Plus IV… but my cabinet is not the design for the larger machines. Just standard opening for machine.

    The opening in Treasure Chest is 24 inches, and the Epic is about 1/2 – 1 inch smaller. My question is, can you still make a custom insert to fit around the Viking Designer Epic machine?

    Thank you

    Janet

    Reply

    • avatar Jan Schiltz
      Jan 26, 2016 @ 08:40:21

      I bought a clear insert from Koala. My dealer ordered it. Seems to work fine.

      Reply

  33. avatar Janet
    Nov 20, 2015 @ 03:52:06

    Just general FYI – The Viking Designer Epic weighs 32 lbs

    Reply

  34. avatar Diane Dean
    Jan 20, 2016 @ 11:50:59

    Hi, just moved to Wichita, KS and will be buying Koala furniture as soon as we close on our home in a couple of weeks. Plan to buy the table with the new larger opening accommodating the Destiny sewing machine since at some point I may trade in my Ellisimo.

    Where do I shop to get the best price? Online or with a dealer?

    Reply

  35. avatar Tori
    Jan 20, 2016 @ 12:23:36

    Hi Diane! While shopping for a Koala Cabinet online is easy and convenient, many people prefer shopping with a dealer. Our independent retailers may have special, bundles, or other promotions going on that we don’t have. Also, your Koala retailer is an excellent resource in helping you decide on the cabinet customizations that will best suit your needs. Thank you!

    Reply

  36. avatar Veronica Morrison
    Aug 28, 2016 @ 09:19:53

    I have a SewMate Koala cabinet which I love. I am considering upgrading my embroidery machine to a Babylock Destiny. I have read that in order to use my current cabinet, I need a special insert which fits on top. I cannot find a picture of this insert. Does anyone know where I can find one. I contacted Koala but heard no response. Thanks

    Reply

    • avatar Tori
      Aug 31, 2016 @ 13:56:30

      Hi Veronica! You will need to order a replacement insert that fits the Destiny machine. You can order this insert through our Sewing and Craft Club site or through your local Koala retailer. While we may not have an exact image of the insert, you will need to specify your machine model. You can order the insert online here: http://bit.ly/2bC3Y1G. Thank you!

      Reply

  37. avatar Melissa
    Sep 04, 2016 @ 22:37:09

    Hi, I purchased the DualMate Plus IV, when I owned the Ellisimo and the Evolution. Both were cut out and I have the ability to raise and lower. Now, I have sold both those machines, purchased the Destiny and the Ovation. Can you tell me what I can do, to get the modified inserts? I also have purchased the Sashiko II, which I don’t have a table for. I have a 10 needle, but it came with the Koala studio. I love the products, but really wish that my ovation could be lowered, but the back must be taken off in order to do this. Destiny, is just too long to do this with. Thank you for the wonderful products!!

    Reply

  38. avatar careoline
    Nov 27, 2016 @ 05:16:32

    I have purchased the XL lift table with my new machine. I want to be able to lower the machine and not have the hole preventing me from moving my serger to the same table. My desk chair is there.

    What insert can I buy?

    Reply

    • avatar Tori
      Dec 01, 2016 @ 13:53:41

      Hello! Please call our consumer helpline at 1-877-496-8060 to speak with someone about the insert you’ll need for this purpose. Thank you!

      Reply

  39. avatar Pamela Graham
    Aug 10, 2017 @ 17:47:22

    I have a Bernina 790 and have an opportunity to buy a koala desk from a friend that has 930 and a 180. Will my machine fit in this cabinet. Thanks, Pam

    Reply

    • avatar Erika
      Aug 19, 2017 @ 12:46:32

      Hi Pamela! Thanks for reaching out. Please give us a call at 1-877-496-8060 so we can better assist you.

      Reply

Leave a Reply

46 Comments (+add yours?)

  1. avatar Brent
    Oct 27, 2014 @ 10:12:07

    Hello,
    I’m very interested in the G3 or XL lift, as I would like to install it in a custom cabinet. Can you provide more information on either one, i.e. manufacturer, part number, specs, etc.
    Thank you!
    Brent

    Reply

    • avatar Susanne
      Nov 03, 2014 @ 08:35:51

      Hi Brent – Koala lifts are only available as part of a Koala Studio.

      Reply

  2. avatar Allison Nesbitt
    Oct 31, 2014 @ 17:03:24

    I have a Janome 15000. Will this machine fit in a Koala cabinet. I am interested in full storage underneath the cabinet, flat-bed usage and on top of table. Looking forward to hearing from you. Thank You.

    Reply

  3. avatar Sandy Wootten
    Dec 04, 2014 @ 16:42:35

    I have the dualmate cabinet and have purchased the new Dream Machine by brother. Can I see a picture of the insert that you are suggesting. Secondly do you sell self healing mats that fit the table part of this cabinet.

    Thanks Sandy

    Reply

    • avatar MaryStanley
      Feb 20, 2015 @ 19:51:13

      I also would like to see a picture of the insert to use with the Dream Machine on my Quiltmate cabinet.

      Also would like to say that these cabinets are worth their money, simply because the support for any problems is wonderful. Have had a couple of problems and they have all been corrected in a short time and with no charge. I have been so pleased.

      Thanks!

      Mary Stanley

      Reply

    • avatar Jan Schiltz
      Jan 26, 2016 @ 08:35:50

      I bought what I thought was a single mat the right size for my table over the internet. It turned out to be 2 mats with a locking system with metal clips. The mat had to be the right length and width and it was. My granddaughter and I use a strong tape to tape them together. Have been using them for over a year that way. Works great. Just have to watch for where they were put together. Hope that helps.

      Reply

  4. avatar Shirley
    Feb 20, 2015 @ 08:19:28

    I do not see a dealer in Florida??

    Reply

  5. avatar Ann Arthur
    Feb 20, 2015 @ 09:27:33

    I have a Koala sewing center and would like to know if you make an insert to fit between the machine and the opening so you can leave the sewing machine level with the top of the table. It would be custom made to the model of the sewing machine. An example would be the insert that is used with the SEWEZI Portable Sewing Table.

    Reply

  6. avatar kathy
    Feb 20, 2015 @ 09:31:20

    To Brent: Linear actuators. They are used to lift TV’s from cabinets, and in auto industry to lift heavy objects for repair, among other things. If you have the talent & math skills to build a custom cabinet, you are well on your way.

    Reply

  7. avatar Diana
    Feb 20, 2015 @ 09:35:52

    OMG…. I love it, I wish I can have it some day and put to my sewing room and my machine will love stay on top of that table set hmmmm

    Reply

  8. avatar Shirley Brown
    Feb 20, 2015 @ 11:44:52

    One more reason to charge more money. If the cabinet is made for larger machines then it should come as part of the package. This stuff is already over priced.

    Reply

  9. avatar Patricia Christensen
    Feb 20, 2015 @ 12:52:35

    After years of wishing and saving, I now have the Sew Mate Plus IV studio with the XL lift. It’s a dream unit and the XL Lift works smoothly and is so quiet. It’s wonderful to have the strong lift and support for my heavy machine. The lift places my machine at any level I want for sewing or embroidery. The matching insert creates a perfect flat surface. The cabinet is certainly worth every penny and the time I spent planning for it.

    Reply

  10. avatar Cassandra J Allen
    Feb 21, 2015 @ 18:49:59

    I LOVE my Koala sewing studio. The picture shown is exactly what I have, color and all. It is wonderful. The cutting height is perfect. The color fits my décor. It keeps me organized and everything is within my reach. I can say nothing against Koala Sewing Studios. It’s wonderful.
    Thanks Koala!!!

    Reply

  11. avatar Dara Dubois
    Feb 22, 2015 @ 22:29:17

    I love my Koala sewing studio. I have the Quilt Pro Plus and the Cub and looking to add the corner unit next.I have 2 machines on each piece and love them. Can’t imagine my sewing room without them. Thank you!

    Reply

  12. avatar Kenda Ross
    May 15, 2015 @ 07:36:44

    I would love to have a Koala sewing studio!! My husband was a great man of making things, but he passed on May 10th. This would look good in my craft room!!

    Reply

  13. avatar EARLIA DERRINGER
    May 15, 2015 @ 07:39:18

    Which cabinet is the one advertised for the Bernina 830?

    Reply

  14. avatar Joycehgillespie
    May 15, 2015 @ 07:55:32

    Love it would be nice with a baby lock in it

    Reply

  15. avatar Jennifer Goodall
    May 15, 2015 @ 08:17:06

    What a dream come true to win such a georgeous and functional piece of furniture. I would have to get a new machine for it!! :)

    Reply

  16. avatar Nancy Bowers
    May 15, 2015 @ 08:54:10

    I believe this set-up is called “A Dream Come True” for anyone who loves to sew. Thanks for the opportunity to win one.

    Reply

  17. avatar Diane Mettler
    May 15, 2015 @ 09:00:08

    I have a Koala Cabinet for a smaller machine. It is marvelous and I would buy the new one for my Embroidery Machine but as a retiree it is not in my financial future……but we can all dream.

    Koala products are built to last and will probably out last my lifetime…..

    Reply

  18. avatar Betsy Taylor
    May 15, 2015 @ 09:04:07

    Please, I need this Koala Studio for my sewing room, that really isn’t a sewing room. However, with this dream come true, it would become my True sewing room. I have a room ready to receive this. Thank you!!

    Reply

  19. avatar Cynthia
    May 15, 2015 @ 12:03:56

    What a dream come true. Someone will be a lucky person. ME?????

    Reply

  20. avatar Betty Fisher
    May 15, 2015 @ 16:21:17

    My area is tight and this would help organize me

    Reply

  21. avatar Tony Tannahill
    May 15, 2015 @ 19:03:29

    <3 :) Would Love to win <3 :)

    Reply

  22. avatar Susanne Deg
    May 16, 2015 @ 02:24:19

    Life is Good..but one should never stop dreaming. It would be “A Dream Come True” with a Koala Studio! What a wonderful way to celebrate quilting, embroidery, and sewing! The beauty and quality of Koala furniture is beyond compare! and worth its weight in GOLD! and it would be sew well loved and appreciated in my home!

    Reply

  23. avatar sandy schultheiss
    May 16, 2015 @ 05:47:56

    Would love to win a Koala. I have a Bernina 820.

    Reply

  24. avatar Pat C
    May 16, 2015 @ 21:27:08

    Presently, I have a sewing table that is about 40 years old. Time to update and have a new sewing table and matching storage. I am retired and cannot afford to purchase these items.

    Reply

  25. avatar Diane S.
    May 18, 2015 @ 15:00:15

    This is a real beauty. I would love to own one.

    Reply

  26. avatar Rosemarie A. Greenwald
    May 22, 2015 @ 10:37:08

    I currently own a Koala studio but it was then fitted for the Bernina 1530. I now have a Bernina 830 which was top-of-line prior to the 880. I assume this XL-lift will accommodate my machine. I understand it cannot be retro-fitted to my current Koala cabinet. My question is will I be able to get the same match of wood to go with my other cabinet? Thnx.

    Reply

  27. avatar Rosemarie A. Greenwald
    May 22, 2015 @ 10:51:23

    See comment above. Needed to correct my email address.

    Reply

  28. avatar William Allender
    Oct 09, 2015 @ 11:38:40

    My wife purchased the KOALA cabinet set about 5 years ago and the lift that is in it has broken. I have to get under the cabinet to do the adjustments for her when she wants to change machines. I was wondering if the XL LIFT can be purchased as I can do the installation my self.

    Reply

  29. avatar Carol
    Nov 17, 2015 @ 09:52:49

    I have a Brother Quattro 2 6700d ad was wondering if the standard lift will work with this machine?

    Reply

  30. avatar Lanie Williams
    Nov 17, 2015 @ 11:40:03

    I wish you would put prices on these posts. On seeing something good, my first question is “can I afford it?”

    Reply

  31. avatar Jan
    Nov 18, 2015 @ 20:22:17

    I just got an Viking Epic. I can lift the machine which means it weighs less than my designer Machine. Will the lift I have work alright for the Epic?

    Reply

  32. avatar Janet
    Nov 20, 2015 @ 03:49:24

    The Viking Designer Epic machine (without embroidery attachment) DOES fit in my Treasure Chest Plus IV… but my cabinet is not the design for the larger machines. Just standard opening for machine.

    The opening in Treasure Chest is 24 inches, and the Epic is about 1/2 – 1 inch smaller. My question is, can you still make a custom insert to fit around the Viking Designer Epic machine?

    Thank you

    Janet

    Reply

    • avatar Jan Schiltz
      Jan 26, 2016 @ 08:40:21

      I bought a clear insert from Koala. My dealer ordered it. Seems to work fine.

      Reply

  33. avatar Janet
    Nov 20, 2015 @ 03:52:06

    Just general FYI – The Viking Designer Epic weighs 32 lbs

    Reply

  34. avatar Diane Dean
    Jan 20, 2016 @ 11:50:59

    Hi, just moved to Wichita, KS and will be buying Koala furniture as soon as we close on our home in a couple of weeks. Plan to buy the table with the new larger opening accommodating the Destiny sewing machine since at some point I may trade in my Ellisimo.

    Where do I shop to get the best price? Online or with a dealer?

    Reply

  35. avatar Tori
    Jan 20, 2016 @ 12:23:36

    Hi Diane! While shopping for a Koala Cabinet online is easy and convenient, many people prefer shopping with a dealer. Our independent retailers may have special, bundles, or other promotions going on that we don’t have. Also, your Koala retailer is an excellent resource in helping you decide on the cabinet customizations that will best suit your needs. Thank you!

    Reply

  36. avatar Veronica Morrison
    Aug 28, 2016 @ 09:19:53

    I have a SewMate Koala cabinet which I love. I am considering upgrading my embroidery machine to a Babylock Destiny. I have read that in order to use my current cabinet, I need a special insert which fits on top. I cannot find a picture of this insert. Does anyone know where I can find one. I contacted Koala but heard no response. Thanks

    Reply

    • avatar Tori
      Aug 31, 2016 @ 13:56:30

      Hi Veronica! You will need to order a replacement insert that fits the Destiny machine. You can order this insert through our Sewing and Craft Club site or through your local Koala retailer. While we may not have an exact image of the insert, you will need to specify your machine model. You can order the insert online here: http://bit.ly/2bC3Y1G. Thank you!

      Reply

  37. avatar Melissa
    Sep 04, 2016 @ 22:37:09

    Hi, I purchased the DualMate Plus IV, when I owned the Ellisimo and the Evolution. Both were cut out and I have the ability to raise and lower. Now, I have sold both those machines, purchased the Destiny and the Ovation. Can you tell me what I can do, to get the modified inserts? I also have purchased the Sashiko II, which I don’t have a table for. I have a 10 needle, but it came with the Koala studio. I love the products, but really wish that my ovation could be lowered, but the back must be taken off in order to do this. Destiny, is just too long to do this with. Thank you for the wonderful products!!

    Reply

  38. avatar careoline
    Nov 27, 2016 @ 05:16:32

    I have purchased the XL lift table with my new machine. I want to be able to lower the machine and not have the hole preventing me from moving my serger to the same table. My desk chair is there.

    What insert can I buy?

    Reply

    • avatar Tori
      Dec 01, 2016 @ 13:53:41

      Hello! Please call our consumer helpline at 1-877-496-8060 to speak with someone about the insert you’ll need for this purpose. Thank you!

      Reply

  39. avatar Pamela Graham
    Aug 10, 2017 @ 17:47:22

    I have a Bernina 790 and have an opportunity to buy a koala desk from a friend that has 930 and a 180. Will my machine fit in this cabinet. Thanks, Pam

    Reply

    • avatar Erika
      Aug 19, 2017 @ 12:46:32

      Hi Pamela! Thanks for reaching out. Please give us a call at 1-877-496-8060 so we can better assist you.

      Reply

Leave a Reply