About Koala Studios

Koala Studios: 10 Koala Studio Design Advantages

1 2 3 4 5 6 7 8 9 10


1. Assembled in the USA


About Koala Studios

All Koala Studios are assembled by American Craftsmen in the USA. They are beautiful in their design and appearance and are built with the best materials and utmost care, providing a lifetime of enjoyment.


2. Rounded Beveled Edges


About Koala Studios

Koala Studios feature rounded corners and beveled edges, enhancing the Studio’s appearance and eliminating corners that snag fabric.

To achieve this, each board is precisely shaped with a computer-controlled diamond tip router, eliminating the need for saws that leave sharp edges.

To incorporate this advanced design features, the wood core must be made from a dense, high-grade 3/4-inch fiberboard with no imperfections.


3. Rich Elegant Veneer


About Koala Studios

Koala Studios are available in eight elegant finishes and will enhance any decor.

Each studio is finished in the same rich veneer and color inside and out and top to bottom, making it as beautiful opened as it is closed.

The veneer is applied through an advanced process called thermo-forming, which encapsulates the entire board and eliminates the need for edge banding.

The finish is a thick vinyl veneer that is hard-wearing, scratch-resistant, water-resistant, and easy to clean.


4. Remote controlled G3 Electric Glide Lift


About Koala Studios

Koala Studios’ innovative lift design enables the operator to effortlessly position their machine at any level with the push of a button. The user has a choice between a hand-held remote control and a built-in toggle switch.

The Koala G2 Lift has been designed to support all machines and provide a stable platform at every position. Two solid rails extend the full length of the lift platform, and the direct drive rack and pinion system moves your machine smoothly and quietly.

For the largest, heaviest machines, Koala’s optional G3 XL Lift provides extra space and support. The XL Lift is available on several studio models.


5. Large Capacity Full-Extension Drawers


About Koala Studios

Koala Studios feature full-extension drawers that glide open and close softly. The silent soft-closing hydraulic cushion makes the drawers impossible to slam.

The 5/8-inch framed drawer boxes combined with the steel drawer glides are weight tested to hold up to 120lbs. fully extended.


6. Multifunctional Bi-Fold Doors- Notion & Fabric Palettes


About Koala Studios

Koala Studios provide flexibility to minimize or maximize the Studio’s designated space by using or removing the Multifunctional Bi-Fold Doors.

If space is minimal, the doors can be folded flush to the sides of the Studio, or the doors can be easily removed.

If room permits, usable surface space or storage can be added to the left or right by attaching Notion & Fabric Palettes to the weight-bearing doors.

The Palettes can be positioned withing a 270-degree radius, providing usable surface areas where needed to support a variety of projects.

All studios are designed to pair together and if needed, the Bi-Fold Doors can be removed and stored.


7. Customizable Options in Width & Height


About Koala Studios

Koala Studios based models are built in widths of 27, 36, 53, and 70 inches. Each model’s footprint can be minimized or maximized depending on the Studio’s designated space.

Choosing the ergonomically-correct height of a Studio is a personal decision based on the individual’s desire to create while sitting, standing, or both. Koala Studios have options in heights of 29 1/4, 32 1/4, 35 1/4, and 38 1/4 inches.

At 35 1/4 and 38 1/4 inches, Koala Studios can be used comfortably while standing for cutting and placement of fabric. The taller height studios can also be used comfortably while sitting with the adjustable Foot-Control Rest and adjustable Koala Sew Comfort Chair.


8. Customizable Options in Shelving, Storage & Accessories


About Koala Studios

The surface and storage areas of your Studio can be maximized with an outback leaf extension, outback shelves and storage boxes. This is ideal when the Studio is positioned toward the center of the room, allowing access from every side.

A custom matching machine insert allows the Studio to be used by any brand or model of machine and enables the fabric to glide over the Studio surface.


9. Top Drawer Delivery


About Koala Studios

Koala Studios Top Drawer Delivery Service is a premium in-home delivery option that delivers the Studio into the owner’s home and room of their choice. The Studio arrives assembled and after the delivery team positions it, the owner only needs to attache their palettes, adjustable shelves, and accessories.


10. Lifetime Warranty



Koala Studio’s Lifetime Warranty protects against manufacturer’s defects in the workmanship and materials and is our promise of quality and responsibility.

The location of Koala’s American factory and superior design enable components of the Studio to be repaired or have a component replaced in case of damage, restoring the Studio to its original condition.

175 Comments (+add yours?)

  1. avatar Cheryl McEwen
    Jun 16, 2015 @ 17:10:25

    I have wanted a Koala studio for my home. I have seen some and the workmanship looks great. Being a taller person I like the height options.

  2. avatar Helen Miller
    Jun 21, 2015 @ 12:19:11

    I have to disassemble my Koala studio. I can not remember what the tool was that locked the shelves in place. Does anyone know?

  3. avatar Leslie Shattles
    Jul 08, 2015 @ 10:36:37

    just a suggestion, I have your quiltmate cabinet and love it, but have you ever considered an embedded metal yard stick, sure would come in handy

  4. avatar Pat
    Jul 22, 2015 @ 13:02:28

    I have a suggestion for your cabinets. There is a gap at the back of the cabinet between the back panel and the floor. This is true all the way around due to the wheel raising the cabinet off the floor. But, at the back, this causes the foot pedal to slip under the back and get stuck in the “on” position, causing the machine to keep on sewing without your foot being on the pedal. Yes, this can be mitigated by adding non-slip material under the pedal, but this doesn’t work very well, and sometime doesn’t work at all depending on the floor surface. Or, one could nail a panel to the inside of the back panel, which would work, but seems like it shouldn’t have to be done at all! I’ve seem all kinds of makeshift solutions to this problem! I think if you made the back panel a bit lower in the pedal area the problem would be eliminated. Is this problem something that your design team has looked at or considered addressing?

  5. avatar Michael
    Jul 28, 2015 @ 17:10:42

    Your website states your cabinets are made of fibreboard not wood. Do your fibreboard and finishes contain formaldehyde or other off-gassing chemicals?

  6. avatar F Brewer
    Aug 22, 2015 @ 13:36:02

    What is the approx weight of the TreasureChest Plus IV?

  7. avatar Jeannie
    Aug 25, 2015 @ 15:32:55

    I have a Unity baby lock machine and I am looking into getting a Koala cub cabinet.
    I have room for the 36″ or possibly 53″ cabinet.What is the depth of the Koala cabinet?

  8. avatar Deb
    Aug 29, 2015 @ 20:47:13

    I am so glad you posted this question about off gassing chemicals, as it is something I have wondered myself.

  9. avatar Tea
    Nov 07, 2015 @ 21:03:35

    I have a kola chair. I purchased 11 years ago. When I purchased the chair, the store called the manufacture about the warranty. They said it would be a lifetime warranty. I like my chair, but the hydraulics has played out. Is there a replacement part for it?

  10. avatar Mary Eunice Weinkauf
    Nov 09, 2015 @ 20:42:51

    Recently bought a Bernina q20 table machine. When we looked for the plans to put the table together it was hidden in the drawer with a sheet that told us where the plans were. This sheet could have been helpful on one of the boxes or on one of the pieces of the table.

  11. avatar Patrice
    Nov 16, 2015 @ 17:07:13

    Where do I find the instructions on how to adjust the machine platform? I have looked various places online and can’t find anything! I am very frustrated! The cabinet it fine, but I don’t know how to adjust the two screws on the track to make the platform stop with the machine level with the table using the plastic insert. The machine goes down and locks, and comes to the top, but will no longer stay in place with the plastic insert.
    I was told by one of your independent distributors that you had instructions online.

  12. avatar Kelly Pilkinton
    Nov 17, 2015 @ 16:56:46

    Please remove me from your mailing list. Thank you.

  13. avatar Donna Hessel
    Dec 31, 2015 @ 20:36:22

    I purchased a Outback Plus (teak) in May of ’01 at Nancy’s Notions. The plastic that is around the
    platform that holds the sewing machine is breaking off. The Company that I purchased it from, SCS USA of Portland, Or. is no longer in business. Does that mean that my “Koala Cabinets Limited Lifetime Warranty” is no longer any good?

  14. avatar Mary Jane Eichholz
    Jan 08, 2016 @ 22:37:35

    I just received my Koala cabinet (3 months after I ordered it …). We are missing a part, but the delivery people just shrugged their shoulders. I also got my chair in two boxes, with no instructions on how to put it together (the delivery people said it wasn’t their responsibility to put the chair together). I’m working with my dealer to figure out the missing part (the second swing support for the extended work table – we only got one, there clearly is a spot for the second one and now the table has no support on one side…). I’m very excited to get this, I’m sure I will love it to pieces, but I guess I expected more from the “top shelf delivery” and I still am not sure everything is there – they put it together, the second person bailed out to the truck and the man put his thing in front of me to sign … so I don’t know if I was supposed to test and look for things (there was no checklist to see that everything was there). Just disappointed with the delivery and wondering still if everything I ordered got delivered (they didn’t put the shelving together, either, but that’s ok because I’m not ready for it, I just ordered it because I was told I couldn’t order it after the fact).

  15. avatar Barbara Roy
    Jan 20, 2016 @ 11:48:38

    I am looking for a sew chair. Send me pictures and prices of your chairs

  16. avatar Tori
    Jan 20, 2016 @ 12:18:33

    Hi Barbara! You can find details and pricing for our Koala SewComfort XL Chairs here: http://bit.ly/SewComfortChair

  17. avatar Janet
    Feb 07, 2016 @ 02:44:27

    The tool came with your unit. What did you do with those when it was delivered?

  18. avatar Sandra
    Apr 05, 2016 @ 13:47:01

    I ordered the Artisan cabinet standard height with the outback extension and now am trying to figure out where I want the electrician to place my in-floor electrical outlet. I need to know where in the entire cabinetry the actual opening to the floor under the machine is located.
    Thanks for you response.

  19. avatar Shirley G.
    Apr 14, 2016 @ 07:22:20

    I was just given a koala cabinet Treasure Chest. Something fell behind a draw and I need to remove to get it. Can you tell me how to remove the draw? Thanks

  20. avatar Linda
    May 02, 2016 @ 21:38:15

    I have tried to enter the present contest but get a 401 error message when the page tries to load. Is this happening to anyone else? Thanks

  21. avatar JOYCE HAMAS
    May 10, 2016 @ 20:57:20

    I have recently shopped for a sewing machine cabinet to house a Baby Lock Destiny but have been looking at other brands. As fate would have it, your wonderful offer just arrived with what appear to be superior designs and quality. I dearly hope to win!

  22. avatar Bunnie
    May 31, 2016 @ 20:37:12

    I have an Artisan cabinet. Hopefully you already have yours by now, or at least you found the right place to get your answer. If not, then: There are 3 openings in the BACK of the main cabinet, two on the right (as viewed from the front) and one in the center.

  23. avatar Doris Culver
    Jun 06, 2016 @ 14:42:01

    i feceived my creative machine embroidery magazine today and it sid to sign up for the drawing but it was to late

  24. avatar Kay dawson
    Jun 29, 2016 @ 10:21:20

    my power lift is no longer working. My sudio is 4 years old.
    How do I get it replaced?

  25. avatar Kim Rayburn
    Aug 17, 2016 @ 04:20:40

    I am looking for information for a friend. His wife’s Koala stowaway cabinet needs repair. One top leaf which opens over the machine has the veneer come completely off. How is this repaired and what kind of glue would reattach it? Also, the trim around the machine platform has cracked in several places. can this be replaced? Also one of the handles on the drawers has broken (the loop to lift and pull is detached and won’t stay in), can this be replaced. If this is not the correct place to ask, please direct me if possible. Thanks for your help.

  26. avatar Cherie Thorpe
    Aug 20, 2016 @ 06:32:12

    I purchased a Koala Cabinet in 2012, and can’t express my disappointment in it. The veneer (laminate) is peeling off all of the shelves, the top, and is starting to peel off the drawers. The cam locks that hold the swing out tops keeps coming loose, and has actually fallen off. The dealer I purchased this cabinet from is “out of business.”

    I called the customer service department, and they have yet to get back to me. So here I sit with warranty in hand, and a 2,700.00 plus cabinet that is falling apart before my eyes. To date I have not heard from customer service.

    At this point it would be hard for me to recommend Koala.

  27. avatar Susan Raabe
    Aug 24, 2016 @ 13:52:05

    I accidentally got too close to the edge of the outback extension when pressing with steam, and it is buckling and coming off the edge. I know this isn’t a warranty issue, but after reading the process used to apply it in the first place, how do I go about replacing it? Can I order the edge piece from you and have it reapplied by a local business? It certainly isn’t worth it to ship it to you for repair. Would it hold if I glued it on? I can live with it, but I’d like to keep it “new” looking! Thank you.

    P.S. I haven’t seen any answers to the questions people have posted to this site. Are they answered via e-mail?

  28. avatar Tori
    Aug 24, 2016 @ 14:01:11

    Hi Pat! Thank you so much for your feedback. We will pass this along to our design team. Thank you!

  29. avatar Tori
    Aug 24, 2016 @ 14:03:40

    Hi Leslie! Thank you so much for your feedback. We will pass this along to our design team.

  30. avatar Tori
    Aug 24, 2016 @ 14:06:22

    Hi Susan! Please call our consumer helpline at 1-877-496-8060 to speak with someone about the best course of action. Thank you!

  31. avatar Tori
    Aug 24, 2016 @ 14:17:11

    Hi Cherie! We are so sorry that you are disappointed.

    Have you heard back from our consumer helpline yet? If not, please send an email to facebook@tacony.com with your contact information, and we will get you in touch with the right person. Thank you!

  32. avatar Tori
    Aug 24, 2016 @ 14:18:03

    Hi Kim! Please call our consumer helpline at 1-877-496-8060 to speak with someone about these repairs. Thank you!

  33. avatar Tori
    Aug 24, 2016 @ 14:18:46

    Hi Kay! Please call our consumer helpline at 1-877-496-8060 to speak with someone about your power lift. Thank you!

  34. avatar Tori
    Aug 24, 2016 @ 14:21:06

    Hi Shirley! Instructions for adjusting the drawers on your Koala cabinet can be found here: http://bit.ly/28QfcNH. Thank you!

  35. avatar Tori
    Aug 24, 2016 @ 14:24:28

    Hi Mary! If you are still missing this part or have questions, please contact your local Koala retailer or call our consumer helpline at 1-877-496-8060. Thank you!

  36. avatar Tori
    Aug 24, 2016 @ 14:28:43

    Hi Donna! Please call our consumer helpline at 1-877-496-8060 to speak with someone about your warranty and cabinet repairs. Thank you!

  37. avatar JOANNE
    Aug 28, 2016 @ 11:08:44

    Please can you tell me if you supply these to the UK? I would really love one!!

  38. avatar Carol
    Aug 28, 2016 @ 22:57:13

    I have a brand new Koala Cub cabinet. Why won’t my lift work? Shouldn’t I have to plug it in? And if so, where is the cord with a plug? Turning the I/O toggle switch doesn’t help. It also does not light up, as videos tell me it’s supposed to.

  39. avatar Paul Quimby
    Aug 30, 2016 @ 14:13:20

    I am the registered owner of a koala table which was gifted to a relative. She has some part on it that is defective. Can I have her contact you for help directly under your lifetime warranty or does the request have to come thru me?

  40. avatar Judy Powell
    Sep 23, 2016 @ 16:54:57

    Would you please have the 2 sizes of Serger cabinets and the 2 Artisan cabinets and the new sewing cabinet available in the planning room section so that we can design our rooms to include some of the new cabinet designs.

    thank you, judy powell

  41. avatar Joanne Flanders
    Oct 02, 2016 @ 17:01:45

    Dear Koala, I want to furnish an empty room and need room design assistance. If I sent you the room dimensions would your team be able to suggest which pieces I should buy? Ideally the room will be setup for the following:

    High (or adjustable) table/work station for cutting fabric
    Desk or some type of table to leave a sewing machine out on for sewing.
    Space for a Serger so it can also be left out.

    Thank you, Joanne

  42. avatar Tori
    Oct 03, 2016 @ 08:41:27

    Hi Joanne! You are welcome to use our online room planner that allows you to put in the dimensions of your room. Find that here: http://mykoalastudio.com/room-planner/. Additionally, your local Koala retailer can help you determine which pieces would be best for your room. Find your nearest Koala retailer here: http://www.sewingandcraftclub.com/koala-dealers/. Thank you!

  43. avatar Karla Colle
    Oct 05, 2016 @ 15:50:09

    Would like to know the dimensions on the Babylock Serger cabinet. Will a Bernina 1150 MDA serger fit in it?

  44. avatar Lesley Buechel
    Oct 29, 2016 @ 22:15:07

    Love my Koala studio have a couple of chips on it anybody know where I can get some touch up paint it’s white.

  45. avatar Darsie Riccio
    Dec 01, 2016 @ 11:27:21

    Your website is WAY out of date! This makes me doubt the accuracy of information.
    It is still advertising a drawing which ended months ago. Where might I find up to date information? I’m interested in your Artisan Studio.
    Darsie Riccio

  46. avatar Tori
    Dec 01, 2016 @ 13:52:50

    Hi Darsie! Information about the Artisan can be found here: http://www.sewingandcraftclub.com/index.cfm?fuseaction=product.display&Product_ID=3354&category_id=303. Additionally, your local Koala retailer is an excellent source for questions, demonstrations, etc. Find your nearest shop here: http://www.sewingandcraftclub.com/koala-dealers/ Thank you!

  47. avatar Terri Kannon
    Dec 18, 2016 @ 14:38:24

    I recently moved and my movers somehow “lost” three of the wheels to the bottom of my “Stowaway” Koala cabinet. I need the black wheel that fits on the metal post. Can I purchase replacements? Thank you for a prompt reply.

  48. avatar Erika
    Dec 30, 2016 @ 10:54:16

    Hi Terri! Please call our consumer helpline at 1-877-496-8060 to speak with someone about ordering replacement wheels for your studio. Thank you!

  49. avatar Odalys
    Jan 17, 2017 @ 20:02:58

    I just received my Slimline Artisan cabinets. It arrived my home at 8:00PM. The delivery men were courteous but rushing since it was so late. There is side assembly for the embroidery unit that needs to be installed. They said;” it does not require assembly, the unit just lays there”. Well it does require assembly an assembly with precision. I sew, I do not assemble furniture. I purchase Koala, because I trust the brand and know is top of the line, built in the USA. But I’m very unhappy that is not assembled completely. The video on your site about the delivery made me feel it was worth the $350.00 charge. The video only showed the side top panels are easy to assemble by the customer, but not the side unit. Like I said it requires precision. I would appreciate a call and a resolution to this situation. I’m so upset I fell like returning the cabinet.
    I could be reached at 407-931-0228 between 9:30AM To 5:00PM eastern time.
    P.S this is the second Koala cabinet I have purchased

  50. avatar Odalys
    Jan 17, 2017 @ 20:09:14

    My order was also missing the Acrylic Mach insert. The delivery was incomplete

  51. avatar Carol LaPorte
    Jan 20, 2017 @ 07:19:57

    Hi–I need to replace the casters on my Koala Outback Sewing Cabinet. They were lost in a cross country move. Where can I purchase them? Thanks.

  52. avatar J. Yandell
    Jan 29, 2017 @ 23:13:02

    My wife recently ordered and received a Sew Mate Plus IV with the OutBack Leaf Extension, XL Lift and XL Custom Cut Matching Wood Insert. The design and build quality of the cabinet is fantastic. However, we are extremely disappointed with the custom cut machine insert. The insert is made of material that is only 1/4 inch thick. This is not the sewing machine insert depicted in the Treasure Chest Plus IV / Sew Mate Plus IV videos on the website. When the insert is installed, it does not sit flush with or sit rigidly in the tabletop cutout. A little pressure causes the insert to react like a springboard. Based on the videos and the $199 cost, we expected the insert to be constructed more like the solid table top insert that comes with the cabinet. Given the quality of the cabinet overall, I expected the machine insert to be designed and built to fill the cutout and sit perfectly flush with the rest of the table without flexing. Consider that for $199, we received the entire Outback Leaf Extension (and support standards) made with 3/4 inch material. For this additional $199, we received a 1/4″ thick flimsy board which is more suitable as a template for building a more practical insert than for actual use as an insert. I suspect Koala’s acrylic insert would be even be more flexible. We don’t think a $199 insert, intended to make the sewing surface level/flush around the machine, should need to be shimmed and blocked in order to be usable when brand new. I will reiterate that the online videos do show an insert constructed to something closer to the dimensions of the solid table top insert, which is what is to be expected given the quality of the fabrication of the rest of the sewing cabinet.

  53. avatar Rita Porter
    Jan 30, 2017 @ 08:31:55

    Where do I find the instructions on how to adjust the locking position on the machine platform in my Outback Plus sewing studio? I have a new sewing machine and the platform needs to lock a couple of inches down from where it does now. I have searched online and have not been able to locate this information.

    Also, how can I get a copy of the owner’s manual for my Outback Plus?

    Thank you!

  54. avatar Erika
    Jan 30, 2017 @ 15:12:44

    Hello! Thank you for reaching out. The acrylic insert should arrive separately. We are sorry to hear about your experience. We’d like to learn more. Please give us a call at (877) 496-8060 to speak with one of our customer service representatives.

  55. avatar Erika
    Jan 30, 2017 @ 15:57:50

    Hi Rita! Thanks for reaching out. We recommend contacting your local Koala Studios retailer about ordering a replacement manual for studio. You can also ask your retailer about adjusting the locking position on the machine platform or call our consumer helpline at (877) 496-8060. Thank you!

  56. avatar Erika
    Jan 30, 2017 @ 16:41:24

    Hi Carol! Thanks for reaching out. Please give us a call at (877) 496-8060 to speak with a customer service representative about ordering replacement casters for your cabinet. Thank you!

  57. avatar Patti
    Jan 30, 2017 @ 21:49:16

    I would like to purchase a Koala cabinet from a store that is going out of business. I cannot fit it whole into my car. Can I take it apart in store? And, then bring it home to reassemble it.

  58. avatar Lane
    Feb 01, 2017 @ 18:45:05

    Is there a specification on how much weight the Outback Leaf Extension can handle?

  59. avatar Robert Riedel
    Feb 02, 2017 @ 11:33:08

    My wife purchased a Bernina Q20 on November 3, 2016 with a Koala Studio table. On December 1, 2016 the table and machine arrived after being told it would be here in two weeks not four.
    On December 2, 2016, two techs from the store came to assemble the table. It was discovered that one leg was broken and would need to be replaced. We were told that the replacement leg would arrive in mid-December 2016.
    Well it is now February 2017 and NO leg.
    The store keeps telling us that Koala is NOT responding to their request for a replacement leg.

    Teresa is Koala representative that is handling this issue.
    Also, my wife was told that Koala was having trouble matching the table color and now you have new software, so send me a new table if you can’t match the color.

    We see Koala = NO SERVICE

  60. avatar Erika
    Feb 02, 2017 @ 15:14:49

    Hi Patti! Removing the back-leaf extension, doors and drawers would be a good idea in transporting your studio. Just reattach them the same way they are removed. Thank you!

  61. avatar Erika
    Feb 02, 2017 @ 15:16:38

    Hi Lane! The back-leaf extension is designed to hold the weight of a sewing project and the placement of a cutting or pressing mat and the applications of both. The leaf is supported by gate-legs that are positioned towards the center of the extension and the weakest points are the back corners. If you have any additional questions, feel free to call us at (877) 496-8060. Thank you!

  62. avatar Erika
    Feb 03, 2017 @ 11:02:16

    Hi Robert! We are sorry to hear about your experience. We have contacted you via email with further updates on your order.

  63. avatar Virginia Baker
    Feb 22, 2017 @ 08:47:01

    I purchased a used Koala Quiltmate Sewing Table with drop leaf, a quiltmate III chest, and a quiltmate rollabout chest. I need to get instructions on how to adjust the height on the manual lift for the sewing table and I also need to order new rollers for the chests. Where can I get the instructions and who do I contact to order the new rollers?

    Thank you

  64. avatar Erika
    Feb 22, 2017 @ 10:48:12

    Hi Virginia! Thanks for reaching out. You can contact your local Koala Studios retailer for instructions or you can speak with the consumer helpline at 1-877-496-8060. To order replacement parts like rollers you will need to call the consumer helpline number. Thank you!

  65. avatar Lane
    Feb 23, 2017 @ 09:38:08

    I have an older machine lift in my Treasure Chest IV. It’s powered and has a pulley system. One of the plastic guides that keeps the assembly in the side track got lost. I contacted Customer Service at 877-496-8060, and was flat out told they don’t sell parts. The person I talked to added that my lift was an old style and came from Australia. Are these very expensive cabinets expected to be disposed of after a number of years?

  66. avatar Erika
    Feb 24, 2017 @ 14:38:31

    Hi Lane! Thanks for reaching out. Depending on when and where your Treasure Chest Plus IV was made determines if we can supply a replacement part for your Studio. If your studio is powered by an electric motor and made in the US, we can order a replacement part. However, if your studio was made prior to 2009 you have an older model that was made in factory in Australia. This factory no longer exists, but a factory in China imports similar cabinets to the United States. Here is their contact information: Arrow Cabinets: 800-533-7347 extension 1 for customer service and their website is http://www.arrowcabinets.com. If you have any further questions feel free to call our consumer helpline at 877-496-8060. Thank you!

  67. avatar Paul
    Mar 04, 2017 @ 14:40:53

    My Koala Studios Sewcomfort Chair is defective. The piston rolls around on the base with no stability. The flimsy plastic nail cover doesn’t work. It seems poorly designed. Is there a replacement part, or should I just return the chair?

  68. avatar Erika
    Mar 06, 2017 @ 11:22:56

    Hi Paul! Thanks for reaching out. Give us a call at 1-877-496-8060 so we can learn more about the issue you are experiencing with your SewComfort Chair. Thank you!

  69. avatar Barbara
    Mar 11, 2017 @ 15:58:02

    I am unable to open the side leaf on my koala drawer chest. Is there a release somewhere? I do not want to force it.

  70. avatar Erika
    Mar 13, 2017 @ 09:29:34

    Hi Barbara! Thanks for reaching out. Please give us al call at 1-877-496-8060 to speak with a representative about opening up the side leaf on your Koala cabinet. Thank you!

  71. avatar Jackie Campbell
    Mar 23, 2017 @ 10:57:06

    On line owner’s manual would be very helpful. I didn’t receive one with cabinet or the pieces that were missed in the original order and just came in yesterday. Also did not receive the hardware for the outback or door shelves. I love my cabinet and everyone has been very nice, the devil is in the details.

  72. avatar Erika
    Mar 23, 2017 @ 14:35:16

    Hi Jackie! Thanks for reaching out. We are very sorry to hear that you did not receive the hardware for the outback shelving and door shelves as well as an owner’s manual. Please give us a call at 1-887-496-8060 to speak with someone about your order and the missing items. Thank you!

  73. avatar Hansa Adodra
    Mar 28, 2017 @ 17:12:38

    i purchased Outback koala model some years ago was very happy with it until recently the cabinet platform does not stay a little below the surface for the sewing machine to stay flush with the cabinet platform. It comes up all the way and the machine way higher than the cabinet platform and is very uncomfortable to operate the machine.
    Please advise how I can fix the problem.
    Thank you
    Hansa Adodra

  74. avatar Erika
    Jun 21, 2017 @ 14:05:37

    Hi Hansa! We are sorry for the delay in response. If you haven’t already talked with your Koala retailer or called our consumer helpline at 1-887-496-8060 we recommend you contact them and tell them what is going on with the cabinet platform. They will be able to better assist you.

  75. avatar Alice
    Jul 07, 2017 @ 16:18:45

    Hello, I wanted to know can I cut with scissors on my out back leaf? I don’t want to scratch it!

  76. avatar Steve McLaughlin
    Jul 18, 2017 @ 07:25:27

    I need to replace the 5 caster wheels on my wife’s Koala sewcomfort chair. Can you help with a price and availability ? The caster wheels easily come off as the rods are permanently attached to the bottom of th chair.
    Please help,

  77. avatar Erika
    Jul 24, 2017 @ 09:31:48

    Hi Alice! We recommend investing in a cutting mat to place on the back leaf of your cabinet. If you have any additional questions feel free to give us a call at 1-877-496-8060.

  78. avatar Erika
    Jul 24, 2017 @ 11:07:52

    Hi Steve! Please call our consumer helpline at 1-877-496-8060 to speak with someone about ordering replacement parts.

  79. avatar Sandra Smith
    Aug 03, 2017 @ 11:32:01

    A few years ago I ordered three cub cabinets, which I love. I recently ordered an insert for one of them and am having trouble locating exactly how much was charged to my credit card. I may be overlooking the amount, but even after several scans of my statements, I can’t find it. When I received the insert, the packing slip only indicated the amount charged for shipping. The retailer was supposed to email me the amount charged to my card, but they never did. I’m including some information from my packing slip in the hopes that you will be able to find out the information I’d like to have.
    Pack Slip: 443911
    Order Date: 4/17/2017
    Sales Order: 94194
    Ship Date: 6/5/2017
    Thanks for you help,
    Sandra Smith

  80. avatar Erika
    Aug 19, 2017 @ 12:41:44

    Hi Sandra! Thanks for reaching out. To better assist you, please give us a call at 1-877-496-8060. Thank you!

  81. avatar Allan
    Oct 21, 2017 @ 12:08:05

    Customer stopped by the shop today. Saturday 21st Oct 1pm.
    She raised her sewing lift to use the machine for embroidery. Artisan Studio cabinet.
    Now the lift will not go back down.
    I had this problem on a QuiltMateIV Plus a few years back, but the Artisan has no exposed access to the limit switch.
    How do I fix this one. The cabinet is at the customer’s home.



  82. avatar Mary King
    Nov 15, 2017 @ 17:34:56

    I recently purchased a Bernina Q20 quilting machine and the Koala table. I was told I could order wheels for this table, however I have no idea where to start or who to contact

  83. avatar Erika
    Nov 16, 2017 @ 19:37:55

    Hi Allan! We are sorry to hear this happened at your store. Please call the customer support helpline at 1-877-496-8060.

  84. avatar Erika
    Nov 16, 2017 @ 19:44:11

    Hi Mary! Please call our consumer helpline at 1-877-496-8060 to speak with someone about ordering the wheels for your studio.

  85. avatar Tami
    Nov 22, 2017 @ 13:08:51

    I purchased a koala cabinet from an estate sale. Now I am moving and have to transport it up a couple sets of stairs and the good quality (weight) is working against me. Is there a way to take it apart (without damaging it) so it’s easier to move? Otherwise I will have to sell it.

  86. avatar Tami
    Nov 22, 2017 @ 13:09:07

    I purchased a koala cabinet from an estate sale. Now I am moving and have to transport it up a couple sets of stairs and the good quality (weight) is working against me. Is there a way to take it apart (without damaging it) so it’s easier to move? Otherwise I will have to sell it.

  87. avatar Erika
    Nov 24, 2017 @ 11:34:03

    Hi Tami! Thanks for reaching out depending on the studio you have, you can remove the doors, door shelves, outback shelves, or notions and fabric palette. If you have any additional questions feel free to give us a call at 1-877-496-8060.

  88. avatar Sharon
    Nov 27, 2017 @ 14:27:14

    My mother recently passed away and I inherited her koala sewing cabinet and sewing machine. It does not have an electric lift so it must be an older model. I can’t for the life of me figure out how to lift the machine to table top. Help!

  89. avatar linda
    Dec 04, 2017 @ 14:17:09

    Push lightly on both sides of the shelf that lifts and it will pop up. It may take a couple of times to get it to release. Good luck.

  90. avatar Susan
    Dec 11, 2017 @ 16:23:51

    I bought a Koala QuiltPro Plus IV and am happy with the quality of the piece…with one exception. I purchased two of the Thread Treasure chests to fill the openings on both sides of the unit. I love the ease of the full extension drawers on the cabinet and expected the thread chests to work well. They do not. The entire 3-drawer piece slides all around the opening as I try to pull open a drawer. I put down some grip material to help prevent that, but the drawers are so difficult to open it doesn’t solve the problem. In order to open a drawer I must use both hands…one to hold the unit and one to pull the drawer and frequently the drawer I am pulling “grabs” another drawer in the process and I am struggling with two drawers at once. Even the grip fabric can’t prevent a shift on the unit when this happens. As a result, I have not used them for thread. In fact, I do not use them at all.

    My question to you…is it possible to order full extension drawers to fit these openings? They would be far more useful than an open shelf or a thread unit I struggle to open all the time.

  91. avatar Karen
    Dec 17, 2017 @ 15:53:29

    I have used the room planner to try and plan for a place for a sewing table. I am getting the Destiny II sewing machine. I like the new slimline series, but I won’t be able to fully extend to the 108″ of the table. I only have 82-83″ that I can use. Can one of the extension be left off?

  92. avatar EVELYN
    Jan 03, 2018 @ 19:58:15

    Where can I go online to register my new studio? Does the serger station also have a label/number so it can be registered?

  93. avatar Erika
    Jan 10, 2018 @ 10:33:22

    Hi Karen! Thanks for reaching out. Yes, the extensions can be taken off.

  94. avatar Erika
    Jan 10, 2018 @ 10:35:28

    Hi Susan! Thanks for reaching out. Unfortunately, we do not make the full extension drawers for the Thread Chest.

  95. avatar Angela
    Jan 17, 2018 @ 13:46:33

    I’m an interior designer and have a client that I am helping with a hobby/craft room. I’m looking at the finish options on your sewing tables. Can you tell me what brand of laminate you use and are these names the names that they use. I would like to see the finishes in person. Or, do you have finish samples that you can send. I’m just trying to coordinate everything as well as possible. Thanks.

  96. avatar Erika
    Feb 09, 2018 @ 14:45:21

    Hi Angela! Thanks for reaching out. Koala Studios come in eight finishes. You can see them at the end of this post: http://mykoalastudio.com/2017/10/koala-designpro/ or visit a nearby Koala Studios retailer to see them in person. We are not able to provide the brand of laminate that is used due to the proprietary rights to the Koala designs and brand.

  97. avatar Sharon Sturley
    Feb 09, 2018 @ 17:55:40

    I Purchased a Koala Pro Plus IV in Canadian Maple in 2010 and have absolutely loved it. Everything has worked perfectly and looked as good as the day I purchased it. That is until we moved from Alaska to Nevada. I was devastated to discover that the extreme heat caused many of the edges on the cabinet to roll up. Is there a way to repair it or purchase a replacement top? Any assistance would be greatly appreciated as the whole studio has served me extremely well over the years. Thank you.

  98. avatar Tami
    Feb 11, 2018 @ 15:46:40

    Can you tell me which sewing machine an insert with code K5B700359 is for?
    Thank you

  99. avatar Libby Sushka
    Feb 16, 2018 @ 11:25:37

    I have a small room for my quilt piecing. 10×11 with a window in the corner. I currently have the corner and left side of a sectional desk. I have my machine on the corner so that I have the natural light, deeper table top and save some space in my room. I put a work table to the right, on risers, for my cutting. I would love to have a corner table that would lift and lower my BabyLock Unity machine but there is nothing with a corner unit. Are there any plans for some corner units.

  100. avatar Debra Merchant
    Feb 23, 2018 @ 10:33:53

    I purchased a sewcomfort chair about 10 years ago. The hydraulic is now giving problems. I will be sewing and it suddenly drops to its lowest level. Wondering if this is something that can be repaired.

  101. avatar Linda Oelrich
    Mar 14, 2018 @ 12:00:41

    I bought my cub plus 1V about 3 years ago. The left side lift now longer works. Also all my cabinets are peeling. We pay a hefty price for these tables they should not be peeling. Please help!

    PS Where I bought the unit is now longer sales them but the should I needed to contact. you directly. Why is there no number to cal for help.

  102. avatar Vicki
    Mar 30, 2018 @ 13:58:50

    How do I adjust the hydraulic lift lower so the sewing machine goes down further into the cabinet for storage? It is a Bernina 780 in a Treasure Chest Plus IV kitchen cabinet height table set up. The machine doesn’t really clear the top for the insert.


  103. avatar Lina Sverlow
    Apr 04, 2018 @ 18:49:09

    I have a Koala Sewing Chair that I purchased at the Road to California Quilt Show a few years ago. The seat of the chair tilts forward and I slide off the seat. My husband has tried to remedy this problem but with no success. Why does the chair tilt forward? I cannot use it at the highest level because I slide off the chair. I cannot use it lower because I cannot sit with my back against the chair without sliding forward. I am ready to throw this chair away. Any suggestions?

  104. avatar Myra Oakes
    Apr 14, 2018 @ 18:36:23

    My serger platform will not raise or lower. I replaced the battery, my sewing platform works fine. Help, I know this should be under warranty.

  105. avatar tk jones
    Apr 17, 2018 @ 12:50:10

    i would like to register my Koala Design Pro but don’t where to find the required serial number. Any ideas?

  106. avatar Susan M
    Apr 26, 2018 @ 00:03:19

    HI! I purchased the Artisan Studio cabinet. I love it! I use it all the time. This is my 2nd Koala cabinet. The first one purchased in 2002. However, I have a little problem. There are several scratches on my cabinet top. It is a working unit & I use it. I try to be careful but it seems that the top scratches all too easily. I inspected my other koala cabinet and it does not have anywhere near the scratches on it as this one does and I used the heck out that thing. I have only owned this cabinet for a year or so. What can I do to remove them?

  107. avatar Cyndi
    May 05, 2018 @ 16:20:01

    How do you attach the extensions? I went to UTUBE, and your web site … neither had a demonstration. Can you help me? Thanks,
    Cyndi Nichols

  108. avatar Lisa
    May 14, 2018 @ 20:45:12

    I don’t know how to remove the drawers from my side cabinet. It’s older, like 15 years, and is not the same as ones I looked up in YouTube. Is there someone who can walk me through this? Something has fallen out of bad behind the draw so it won’t shut all the way and I can’t reach it .

  109. avatar Amy
    Jun 26, 2018 @ 16:29:12

    Hi, I just purchased the Koala Treasure Chest floor model at my LQS. My question is, what is the standard that comes with it, I don’t believe it was completely put together because of space. I cannot to find the standard Treasure Chest online. In the broachure it’s shows, right and left pallets attached to the doors and storage compartment with adjustable shelves. Are these part of the standard Treasure Chest.

  110. avatar Amy
    Jun 26, 2018 @ 17:17:01

    Adding on to previous, I can only find the Koala Treasure Chest Plus IV, was there an older model that was just The Treasure Chest? The one at my LQS is selling for the floor price.

  111. avatar Mary
    Jun 27, 2018 @ 10:39:05

    I purchased a Bernina Studio cabinet a couple of years ago. May be downswing and selling the cabinet. A friend is inquiring as to the actual size of the opening for the machine. My eyesight is not allowing me to be very accurate. Can you give me those measurements, like where the insert would sit.

  112. avatar Meg Pitts
    Jul 24, 2018 @ 14:35:23

    I have an older table and I am not even sure if it is a Koala. I thought it was!!! The tag inside the drawer says: 898-5. HOAK TABLE, 4039 Cabinet/Table. Is this a Koala? I would like to try to get an insert for my new machine.

  113. avatar Sharon Koelewyn
    Jul 28, 2018 @ 18:16:52

    Can I order a cabinet for my Destiny without the extra side cabinets?

  114. avatar Jacki Hamilton
    Aug 08, 2018 @ 21:54:13

    Will the new Babylock Solaris machine fit in my Koala cabinet with the XL lift?

  115. avatar Kathy Conway
    Aug 16, 2018 @ 19:18:52

    I purchased a Design Center Plus IV in 2011 and have absolutely loved it! However, today we put the doors in to a covered vehicle to move them and apparently the warmer temps have caused the laminate to peel up and loosen on all of the edges of the doors and shelves. This was only after about an hour in the vehicle. I hope we can get this resolved soon! Thank you

  116. avatar Amy
    Aug 28, 2018 @ 10:15:06

    One of the wheels on my Koala sewing chair is broken and needs to be replaced. Can you tell me how to go about this? I can’t seem to remove the broken wheel and it looks like the Koala wheels are not standard size. Where can I buy replacements?

  117. avatar Chris
    Sep 03, 2018 @ 15:02:53

    Is there any way to remove the drawers on my Koala cabinet?

  118. avatar Joan Manning
    Sep 04, 2018 @ 06:23:11

    We put together my Tiara Studio table and wanted to make you aware of two of the issues we encountered. First, not enough wooden pegs were included for the installation. We were able to pick some up at the hardware store.

    Second, one side of the table fit perfectly into the legs, but the other side was a problem since the peg holes on top of the table were not in alignment with the legs. So we eliminated the pegs from both sides and just used the cam lock pins.

    The table is together and seems to be stable.

    Joan Manning

  119. avatar Patrick Stevenson
    Sep 10, 2018 @ 14:14:09

    My wife purchased an older model Koala studio. I have been unable to locate what model anywhere. It does not have an electric lift. You simply press firmly on the lift to raise and lower. The lift has detached from the rails and I’ve been unable to get it back on track. Any assistance would be appreciated.

  120. avatar Scott Seidman
    Sep 15, 2018 @ 12:21:03

    I have an older Koala with the manual lift. I need to replace one roller on the cable systelift system. Can you guide me on how to do this? How do I release the tension to get a new roller wheel on?

  121. avatar Chris
    Sep 25, 2018 @ 01:42:54

    I had the same thing happen. Did you get any response?

  122. avatar Chris
    Sep 25, 2018 @ 01:48:46

    I had the same thing happen. Have you had any luck fixing the laminate?

  123. avatar Ricki Verne
    Sep 29, 2018 @ 16:12:39

    I have a Koala cabinet with 2 stations for machines. One of the lifts has stopped working and I am having a big problem with finding someone to repair it . I live in California in Los Angeles area. Any help would be greatly appreciated

  124. avatar Eva Yong, M.D.
    Oct 03, 2018 @ 14:43:12

    Dear Koala Studios, I love my double machine sewing studio. Your craftsmanship is amazing; which is a high compliment for my father was an excellent finishing carpenter who was very exacting.
    Is there any way of ordering a free standing rolling cabinet with drawers, and includes the embroidery hoop and base storage with two of the tilt down thread holders? I would greatly love to have one manufactured for my purchasing. I would anticipate others would also purchase.
    Sincerely, Eva Yong, M.D.

  125. avatar Mary Mattes
    Oct 12, 2018 @ 18:16:40

    I would like to purchase a Koala chair for sewing, however when I went to try them out
    I discovered I’m to short (4’11’) for my feet to be flat on the floor at the lowest seat position.
    Any suggestions, I use a foot pedal to sew.
    Thank You

  126. avatar Marijean
    Oct 14, 2018 @ 21:59:28

    I have a Koala sewing chair and one caster broke off. where can I get a replacement? The chair is in much too good condition to throw away but casters available at all the local home stores do not have your type of caster available.

  127. avatar anne dominick
    Oct 15, 2018 @ 06:22:06

    I bought my Koala sewing cabinets in 2007. In moving three wheels were broken. Can you replace those wheels?
    Thanks ahead for your info.

  128. avatar KIM JOHNSON
    Oct 24, 2018 @ 06:55:21


    Two questions:
    1) I have a couple of broken casters on my table. I would like to replace them all with casters that are more heavy duty. What is the size of the screw-in stem? (1/4″, 3/8″, or something else);
    2) I currently have a Babylock Destiny but will soon be getting a Solaris. Are there any plans in the works to provide a replacement for the embroidery arm drawer that will allow for storage of the larger Solaris arm. If not, I love the idea posed by Eva Yong regarding a separate storage cabinet with room for embroidery arm storage.

    Thank you.

  129. avatar Martina Debruyn
    Nov 02, 2018 @ 01:45:58


    I have a Koala table for my Bernina Q20 machine. We want to know if it is possible to order a custom made extension for the left side of this table. The intention is to have a wider table and support the extended left side against the left wall in my sewing room.

    I live in Saudi Arabia and will have to get the table extension shipped here.

    Kind regards,
    Martina Debruyn

  130. avatar Lisa
    Nov 04, 2018 @ 17:18:54

    I have this same problem. Did you find an answer? I have not found out how to do this yet.

  131. avatar DARLA LAWTON
    Nov 09, 2018 @ 15:33:50

    I am looking for the smallest cabinet to fit the Babylock Destiny 2. I do not need extra storage for the embroidery unit or hoops as I already for a cabinet for such items. I am looking for the simplest cabinet to fit the Destiny 2 when using it as a sewing machine in the flush with the table position and upwards in the embroidery position.

  132. avatar Karen
    Nov 12, 2018 @ 12:02:09

    Help…I have a Koala cabinet with a manual lift. It will not rise no matter what I do. It is in the locked position and will not budge no matter how much pressure I push down on it. Is there something else I can do?

  133. avatar Jean Kwall
    Nov 18, 2018 @ 14:11:06

    I am having precisely the same problem as Karen. The manual life simply will not budge. It worked perfectly when I last used it – about 4 months ago and now it is totally immobile. There are no parts on the floor which would be the case if some part came off. Who can offer a suggestion?

  134. avatar Jenny Brotherton
    Nov 19, 2018 @ 22:16:51

    Do you still sell Koala Furniture in Australia through HobbySew (or elsewhere) as non of your furniture shows up on their site and it would be too expensive for me to ship it over on top of he purchase price.



  135. avatar Dallas Jensen
    Nov 22, 2018 @ 09:06:00

    My girlfriend bought a Koala Sewing center at Zede’s Sewing Studio in Columbia Missouri. The shop is now out of business. The edge veneer on one of the drawers is curling up on all four sides. That interferes with opening and closing the drawers. How can we get it repaired? What other information do you need to advise me? Would pictures of the defect be helpful?

    Dallas Jensen

  136. avatar Darla Allison
    Nov 29, 2018 @ 10:35:00

    The power lift on my cabinet is not working. I have replaced the battery in the remote. When you push the buttons on the remote red lights come one. It does not work from the manual control either. It is in the highest position. I will be moving soon and it needs to be lowered.

    Also, how does a new insert work? Do you have to remove the top? I have a Destiny. When I purchased my cabinet I had an older Brother.

  137. avatar Sherry Bonnett
    Dec 03, 2018 @ 11:28:46

    Can I please send a picture of a table a mom had and see possibly how old and what it is worth to someone? Need to sell it.

  138. avatar Melanie
    Dec 04, 2018 @ 09:17:33

    Do all the cabinets fit Bernina machines?

  139. avatar darcusmarina parker
    Dec 15, 2018 @ 15:12:03

    I want koala studio catoulge book.
    when I order one you won’t send me one why
    thank you.

  140. avatar Karla Wright
    Dec 17, 2018 @ 11:33:52

    Do you still manufacture the TreasureChest Plus IV Sewing Cabinet at 35 1/4″ in height? It appears on some dealers websites but one dealer indicated it was no longer being made.

  141. avatar Glenda Womble
    Dec 19, 2018 @ 06:21:11

    I have a 20 year old Koala cabinet that I love! It has a roll out cabinet on the right side with a surface area that I use for my serger. The casters have all fallen out of the bottom of the cabinet, plut I have lost one of them, somehow. How do I purchase another caster, and any suggestion for getting the cabinet repaired. Thank you.

  142. avatar Jill Ingram
    Jan 25, 2019 @ 22:47:35

    My husband and I purchased a Koala Dualmate Plus IV June 21, 2018. It was purchased through Sierra Sewing Center at a quilt show held at the Reno Convention Center. Gladys Tan was the Koala representative at the show. I was looking for a cabinet for my Janome Horizon 15000. When I saw the Dualmate Plus IV I was impressed since the rep. said it would hold my Janome and my serger, and I’d be able to store my embroidery hoops in the cabinet, too. The product was delivered September 20th.

    I have not been thrilled with this purchase since it was delivered. It is basically a very large furniture piece that holds my machines. I had asked Gladys if the space between the footwells could be used to store my hoops. Gladys assured me this could be done and wrote it out on the order form. At NO TIME did Gladys tell me I would need a taller cabinet than the one I was looking at. That would not have been a problem. (The hoops for my sewing/embroidery machine are much larger than any Baby Lock hoops.)

    When my initial inserts arrived (lucite inserts) the insert for the sewing machine did not fit my cabinet with the Janome in place. Eventually the cabinet matching inserts arrived and they fit around my machines. However, neither insert is worth the $99.99 I paid for the large insert and the $74.50 I paid for the serger insert, and the $198.99 I paid for the embroidery hoop set up is not right since the cabinet does not accommodate my hoops at all.

    Please let me know how these items can be returned and a refund of the $373.47 for these items will be processed.

    Thank you for your attention to this matter.

    Sincerely, Jill ingram

  143. avatar Jeri Shean
    Jan 29, 2019 @ 16:38:02

    I need a replacement top for my Koala Cabinet. I called once and was told that it would cost 100$ plus shipping. Can you advise me on how to get this ordered?
    Thank you,
    Jeri Shean
    3846 S Homewood
    Springfield, MO. 65807

  144. avatar Theresa Bush
    Feb 05, 2019 @ 19:18:58

    I purchased an Ash white Artisan collection cabinet on 9/5/18 from Lakeshore Sewing, Wyoming MI. I have a Pfaff Creative Sensation Pro sewing machine. How is it 6 MONTHS LATER. I am STILL waiting for my matching wood insert that I paid 199.00 for????
    I always thought Koala cabinets would have top of the line customer service? THAT HAS NOT BEEN MY EXPERIENCE, and no one can tell me when I will get it. I spent 4,000.00 plus for this cabinet and would like my matching insert. I was sent an Acrylic Sew Steady insert until I can get the one I ordered, but no knows when that will be?
    I am beyond upset and would like an answer!
    Please contact me with a solution
    Thank you

  145. avatar Susan Kappelman
    Feb 07, 2019 @ 12:35:24

    The caster wheels on my Koala cabinet are bound up with hair and thread. I have pulled out as much as I can with tweezers, but there is still some caught up in the axle. Some of the wheels do not move freely.

    How do I take the casters apart?

  146. avatar Erika
    Feb 10, 2019 @ 11:54:41

    Hi Susan, we recommend contacting our customer support team at 1-877-496-8060 so we can further assist you.

  147. avatar Erika
    Feb 10, 2019 @ 11:56:59

    Hi Theresa, thanks for reaching out to us. We are sorry for the delay in response and delivery. Please contact our customer support team at 1-877-496-8060 to speak with someone about the estimated delivery of the wood insert for your studio.

  148. avatar Erika
    Feb 10, 2019 @ 12:08:10

    Hi Jeri, Please call our consumer helpline at 1-877-496-8060 to speak with someone about ordering replacement parts.

  149. avatar Erika
    Feb 10, 2019 @ 12:11:13

    Hi Jill, thanks for reaching out. We are sorry to hear that you are unsatisfied with your purchase and that it didn’t meet your needs. Please call our consumer helpline at 1-877-496-8060 to speak with someone about your particular situation.

  150. avatar Cheryl Devendorf
    Feb 15, 2019 @ 18:03:57

    I purchased a Koala cabinet 14 yrs ago (I don’t think you make this anymore) it is the Quiltmate 111 serial number 608110 it has 2 slide drawers on the left side my problem is that one of the little screws that holds the “slider” to the drawer broke or came loose and got lost (they are soo small) I would like to see about a replacement screw? I have checked all hardware store and they do not carry anything that small.

  151. avatar roberta barnes
    Feb 17, 2019 @ 15:59:56

    I have a Koala (I think) Quilters Delight cabinet. It has the number 432514 on a plate on the inside of the cabinet. Can you confirm that this is a Koala cabinet and if so how or whereI can get a insert for the cabinet to fit a Bernina 1030 sewing machine. Thanks in advance

  152. avatar Bob Day
    Feb 26, 2019 @ 13:57:10

    I just received my wife’s demonstration center cabinet. There are no assembly instructions for this cabinet. Could you email me the assembly instructions.


    Bob Day

    PS – Job: 424195-1-1 Part KDMO-NAO

  153. avatar Erika
    Feb 28, 2019 @ 15:43:57

    Hi Bob, please call our customer support team at 1-877-496-8060.

  154. avatar Erika
    Feb 28, 2019 @ 17:09:12

    Hi Cheryl, thanks for reaching out to us. Please call our customer support team at 1-877-496-8060 to speak with someone about the screw you need to have replaced.

  155. avatar Elizabeth Knowles
    Mar 02, 2019 @ 11:12:50

    10/17/2014 purchased Koala sew mate #70050099 from Quilters Stash, Hurst, Tx, all paperwork unfortunately has been lost, I have found two pieces 6 3/4 x 9 3/4, beveled top, 4 holes on back, non screw holes, I have absolutely no idea what they are for????? pls help?

  156. avatar Cheryl Butera
    Mar 04, 2019 @ 12:20:21

    3/4/2019 I purchased an Artisan Studio w/XL Lift in English White Ash Koala Sewing Cabinet on July 21/2018. After a number of concerned calls, I finally received delivery of the Cabinet on December 28, 2018 – 5 months later! The cabinet is lovely but although a “Koala White Ash Custom Cut Wood Machine Insert” was ordered, it did not arrive with the Cabinet. I called your customer support number and eventually spoke with “Emily” – several times – who on January 21, 2019 assured me that the wood insert would be arriving at my home between February 8 and February 13, 2019. I have not received the insert. I have called and left messages for “Emily” twice with no return call. I called once again this morning and found that my wood insert (Order #388912) has not even been shipped! I left a message again for Emily.
    Erika, could you please look into this for me? I have been very patient but this is ridiculous – 8 months to receive a complete order that was suppose to take 3 months at most. All I want is the insert. Can someone please do something to help me with this situation?

  157. avatar Erika
    Mar 05, 2019 @ 12:49:39

    Hi Cheryl, thanks for reaching out. We will look into your order.

  158. avatar Erika
    Mar 05, 2019 @ 12:53:35

    Hi Elizabeth, thanks for reaching out. We recommend contacting our customer support at 1-877-496-8060 to speak with someone about your previous order.

  159. avatar Laurel Varner
    Mar 13, 2019 @ 12:19:20

    After three months of anticipation, I have to say that I’m greatly disappointed in the quality of my studio. I’m working with the store that I purchased it through but wanted to express my frustration directly. Not only was the Outback leaf I ordered not included, the lift worked long enough to lower my machine then quit. It does not respond to either the remote or the toggle switch. The configuration of the embroidery arm drawer is off so that I have to tilt the arm in order to close the drawer fully. The fittings on the underside of the notions and fabric tables are too small for the hardware provided so I can’t use those either. I took them in to the dealer and the hardware provided is the same as they use. Finally, my studio was delivered a week ago but I have yet to hear anything about the two machine inserts that I ordered. The store informed me that those are delivered separately but as I’ve said, I’ve received no word on when I can expect those. I suppose those aren’t of much use unless/until the lift is working but I’d like to think that can be resolved soon.

  160. avatar Erika
    Mar 14, 2019 @ 14:23:39

    Hi Laurel, thanks for reaching out to us. Can you give our customer support team a call at 1-877-496-8060? We would like to learn more about your particular situation.

  161. avatar Kris Shanks
    Mar 16, 2019 @ 14:23:17

    Been waiting 4 months for my White Ash serger station for my Babylock serger. Every time I call the store I get well the factory moved, it has been cold, we don’t now, it will be here by end of January oh no shipping for sure February 8 will be received by you for Valentines Day. Oh now still too cold so production off, by end of February. End of February comes now still too cold production behind by mid March. Here we are mid March 4 months to the day that I paid the dealer and now again get told end of March. What is your suggestion now? Who do I contact for a direct answer? Or is it too cold to answer the phone too.

  162. avatar Vickie Fromm
    Mar 18, 2019 @ 16:21:46

    I purchased the TreasureChest studio with electric glide lift. I have another koala table that I have had for 10+ years and have been extremely happy with it. I cannot say the same for the TreasureChest. The ledge that goes on the attached doors are not very stable, to say the least – one fell within the first week I had the studio. I just picked up the shelves for the doors and the way they attach is extremely weak, one of the prongs has already fallen out. Considering the cost, I would have thought this studio would have been equal to the workmanship of the original one I purchased 10 years ago.

  163. avatar Erika
    Mar 21, 2019 @ 11:06:16

    Hi Kris, thanks for reaching out. We understand your frustrations and realize that your situation needs to be addressed. You can contact our customer service team at 1-877-496-8060 for direct communication regarding your order.

  164. avatar Erika
    Mar 21, 2019 @ 11:08:07

    Hi Vicki, thanks for reaching out to us. We would like to learn more about the issues you are experiencing. Please call our customer support team at 1-877-496-8060.

  165. avatar Christine Johnston
    Mar 22, 2019 @ 12:30:34

    Hello, I bought a Craftpro Plus IV Floor model from Pennington Quilt Works. I’ve been trying for over 2 1/2 hours to get through to an agent to discuss problems with the laminate peeling and cracking on two of the doors, can someone please call me 215-962-8226. Thank you

  166. avatar Missy Klimitchek
    Mar 23, 2019 @ 12:18:23

    I am starting to question my decision to purchase this product! I purchased in November, 2018 at Houston Quilt Show. I was told it would be shipped by Feb 15, 2019. In December, 2018 I received a call from Koala saying it would ship mid January. Great! And a nice surprise. Mid-January comes and goes so I call to check on it. I am told it will now ship mid-February. Ok. That was the original ship date anyway. Mid February comes and goes so I call again. The lady calls me back and says it will ship mid-March. Mid-march arrives and still no word, so I call again to check on it. The lady calls me back and says it will ship that Friday and by the following Friday I should hear from the shipping company to make arrangements for delivery. Yayyy! I start cleaning my sewing room up and moving furniture out in preparation for my delivery in a few days. 2 days before my cabinet is supposed to arrive I receive an email saying there is a problem with my order and it will be delayed and to complete a form for the best way to contact me to discuss it. Really? You guys have called me and emailed me. First, I shouldn’t have to fill out a form on how to contact you when I have been calling you for literally, months. Second, what happened in 5 days from “your cabinet has shipped and should arrive by next Friday” to “There is a problem with your order and it hasn’t shipped”? I called to find out what in the world is going on? I get the same lady I have been talking to since January. Now she has an attitude. “I don’t even know who you are?” and “I don’t know what happened. I have been out sick.” I JUST SPOKE TO HER 5 days earlier when she told me my cabinet was shipping the very next day, but okay. I asked to speak to her supervisor. She says “Ok. Let me see if she is in.” Surprise, surprise, she had “just left for the day”. I ask for a voicemail and a direct number to her and suddenly she is able to transfer me and her supervisor answers. Wow. She has no answer either, other than my cabinet has still not shipped and they are backed up in production. How do you tell me my cabinet is finished and is shipping, then 5 days later tell me it isn’t even made yet? So, my cabinet that was supposed to ship in 3 months is quickly approaching 5 months. Guess I will move all my old furniture back in my sewing room and continue to wait. So frustrating. Again, starting to question my decision to purchase this. I have special ordered a vehicle and got it faster than this sewing table!

  167. avatar Terry D Barnum
    Mar 24, 2019 @ 20:57:50

    After reading all the problems folks are having with this company. I will getting my sewing furniture elsewhere. To bad a company can’t stand behind their orders and deliver them on time with all the pieces.

  168. avatar Sherrie Guerrero
    Mar 25, 2019 @ 10:06:58

    I am super frustrated and upset. I feel like I was lied to. I waited 4 months to get my studio. Was told it would be assembled by delivery company. NOT! I am missing the back leaf, the foot pedestal – The large bottom drawer does not fit (it scrapes the sides and interferes with the operation of the middle drawer. The doors are not installed – and there are no directions on how to do it – only on how to remove and align. I’ve called the company and complained, and I get no feedback on what is happening.. When will someone be out to fix the drawer and put the doors on?
    I don’t want to be negative, but this just isn’t fair – to be told one thing and have something totally opposite happen.

    Still waiting for answers . . . . .

  169. avatar Nancy Hodson
    Mar 28, 2019 @ 13:57:35

    What is the difference between the Koala Craft Pro Plus IV and the Artisan Storage Center? Is the Craft Pro Plus IV still made? Are the finishes the same as the Artisan Series so I can mix the two?

  170. avatar Erika
    Apr 03, 2019 @ 13:55:53

    Hi Nancy, thanks for reaching out. The Koala Craft Pro Plus IV is no longer available. The Artisan Storage Center and our current Koala cabinet product assortment come in five finishes (Asian Golden Teak, Birdseye Maple, Brazilian Cherry, English White Ash, and North American Oak).

  171. avatar Lance Moyers
    Apr 04, 2019 @ 14:05:09

    Hi I just purchased a used Koala Kangaroo Kabinet model #KCSTOW8 and I’m looking for a few replacement parts. Can you suggest a website for for this model ?
    Thank You,

  172. avatar Michelle Klimitchek
    Apr 08, 2019 @ 16:09:08

    I see my previous comment has been removed about how incredibly long it has taken for me to get the table I ordered back in November shipped. Now that it has finally shipped (surprisingly, not long after I made the post) the delivery company can’t seem to locate my house that is literally 5 miles from a major interstate. Granted, the lack of common sense on the part of the driver is not your fault, however your company chose this particular shipping company and, unfortunately their lack of professionalism and customer service is a reflection on you. The driver was literally, 200 yards from my house. Took a wrong turn and decided to turn around and go home rather than call me. It will now be another two weeks with my table sitting in some warehouse before they can deliver to me again. Frustrating beyond belief.

  173. avatar Sue Lee
    Apr 10, 2019 @ 17:46:47

    Table for Bernina Q20 was shipped with cam pins that are too short. How much longer are we going to have to wait to get the pins replaced.

  174. avatar Susan Eulau
    Apr 15, 2019 @ 21:14:11

    I am in the same boat. 8 months in and I still have no insert. I have been promised the insert approximately every 2-4 weeks since December, with the last promise being that it would ship April 1. Make no mistake, this is fraud. They have had our money for months with no intention of sending the product. They do not answer the phone or return calls. I have already involved the quilt shop where I purchased the cabinet. This did not help, but I am certainly going to talk to them about discontinuing their relationship with Koala. If you look through all the responses to the FAQ’s they all say call customer service but they know perfectly well that no one is answering that phone nor returning calls.

  175. avatar Liane McConnell
    Apr 17, 2019 @ 01:13:26

    I bought and paid for a Bernina Studio in August 16, 2018. I was told 6-8 weeks for the cabinet to be built and delivered. This was an expensive purchase for me at over $4,000. Emily called and went over the order on September 10, 2018. Delivery set for the first week on November. I heard nothing the first week of November and called to be told the materials were on backorder. Delivery promised November 12-19. December 10 no cabinet or communication I asked for a refund and magically shipping was promised for December 14, 2018. The cabinet shipped and the local delivery was scheduled for Christmas Eve. The cabinet arrived but the Outback leaf was not on the cabinet as ordered, the wood insert didn’t fit my machine and the lift did not work and the second machine insert was missing . I called on December 26 to be told the engineering dept would look into the insert fit issue and the second insert would be shipped on December 28 and that I must be mistaken the Outback leaf wasn’t on my order. Luckily I had the original order sheet from the dealer. Emily then said it was an order entry issue on their part and they would get it right out. It’s mid April, 8 months later and still missing the gate legs to support the leaf, which arrived in January with no instructions or legs. Those arrived in February but in the wrong color and no hardware. After receiving 7 assorted wood inserts for various machines that I don’t have I requested acrylic inserts and those finally arrived from Sew Steady in April. I was told to throw those wrong inserts in the garbage. I called yesterday and was told Thursday they are making replacement parts and my parts will ship on Friday. This is the most ridiculous company I’ve ever dealt with. The dealer has tried without success to help. Maybe we should band together and file a class action lawsuit to recover our damages. I’ve been promised and promised what I paid for and still don’t have it. Don’t buy anything from Koala or Tacony they lie and don’t deliver. Funny that every response here is to call the customer service number but no one at that number has anything but excuses and “it’s on the way” lies. I believe there is a serious problem with this company.